Techniseal Next Gel
| Color | Qty | Price |
|---|---|---|
| Prairie Tan | 50lb Bag | $50.00 |
| Prairie Gray | 50lb Bag | $50.00 |
| Black | 50lb Bag | $60.00 |
Uses & Properties
- Concrete pavers, wet-cast pavers, natural stone, textured or clay pavers and porcelain tiles
- Heavy-sloped and high-traffic areas
- High-humidity areas and pool decks
- Commercial, residential, industrial and public projects
- False and wide joints from 1/16” to 4"
- No dust
- No haze
- Fast wetting
- No haze
- Optimal strength
- Deters ants and other insects
- Inhibits weed growth
- Eliminates joint erosion – water, frost heaving, wind, power washing, etc.
- Water-resistant after 60 minutes
- Stabilizes pavers – Strengthens interlocking
Directions For Installation
- Before you begin before proceeding with the installation, make sure you have an up-to-date technical data sheet in hand and visit techniseal.com to watch the application video.
Installation Conditions:
- Bedding must be made of 3/16” dense graded sand.
- Temperature must be above 32°F for 48 hours following installation.
- Surface and joints must be dry.
- Sprinkler system must be turned off.
- Product must be tested on a small area to insure that texture and color meet expectations.
Necessary tools:
- Street broom with semi-rigid bristles.
- Plate compactor (pavers and slabs) / Roller compactor (natural stone and porcelain tiles). Plate compactor – Ideally, the plate compactor should have a minimum centrifugal force of 25 kN (5000 psf) and a frequency between 80 and 100 Hz. The weight of the plate compactor should not exceed 100 kg (220 lbs.). A smaller machine can be used for repair work and joint replacement.
- Leaf blower.
- Spray nozzle and garden hose.
IMPORTANT: Do not use this product as capping sand!